13
14
Installation of Battery Modules
1.
Installation of mounting bracket
Mounting the mounting bracket of fen4850 battery on the pole.
Note:
Because customers have different requirements for mounting brackets, Narada does not provide
mounting brackets for the time being. It is configured by the customer, but the mounting holes of
the mounting brackets need to match the mounting holes of the FEN4850 battery.
If the mounting bracket must be provided by Narada, the customer needs to provide Narada with a
drawing of the mounting bracket.
2.
Installation the handle and corner guard
Install the handle and corner protector on the battery with the mounting bolt provided by Narada.
In
order to facilitate the transportation of the battery, and protect the battery terminal from being
damaged when the battery is dropped, causing a short circuit and causing danger.
Installation
Unboxing & Inspection
■
Please study this manual before installation.
■
Please inspect the package before unboxing, if any destroy with appearance, contact with the
supplier as soon as possible.
■
This device shall be installed and operated by professionals.
Preparation for Installation
■
Batteries shall not be placed close to heat source.
■
Batteries shall be installed in place with good ventilation to assure enough heat dissipation.
■
Batteries shall be placed in are with clean ambient and low humidity.
■
Heavy weight shall not be placed on any cable.
■
Following are the tools possibly but not limited be use for installation:
3
.
Installation the battery
Install and fix the battery on the mounting bracket.
M
6
M5
Note:
1.
Due to the heavy weight of the battery, safety protection should be taken during installation to
avoid personal injury when the battery accidentally falls.
2.
The installation must be tight, and the battery port must face the ground.
3.
Although the FEN4850 battery has an IP65 protection level and has a lightning protection
configuration, it is still necessary to take protective measures such as lightning protection for the
installation pole.
4. FEN4850 battery can be installed in two ways: back mounting and side mounting
（
Depth: 10mm
）
Mounting holes
：
Mounting
Bracket
Hole
Side
Mounting
Back
Mounting
