11
F I R E P R O T E C T I O N
(Applicable only where local ordinance permits use of this alarm control panel for fire protection).
Fire-Zone Alarm
If a fire is detected, the FIRE icon will display with the zone number and the
keypad sounder will pulse.
•
If a fire is in progress, evacuate the premises immediately! If necessary, call
the Fire Department from an outside phone.
•
If there is no evidence of a fire, enter your code and press
u
to silence the
alarm.
•
Check the smoke detector(s). If a smoke detector tripped, its red alarm
indicator light will be on.
•
After the alarm condition is corrected (thermostat cooled down; smoke cleared
from detector; etc.), pressing
y
again will reset the keypad within about 10
seconds.
F
ire-Zone Trouble
•
The system is constantly monitoring the Fire Zone(s) to insure they are in good
working order.
•
If a problem on a Fire Zone is detected, a system trouble E41 will display,
followed by the number of the Fire Zone in trouble. The sounder will activate, the
RESET and TROUBLE icon will appear and the FIRE icon will blink.
•
Press the
y
button to silence the sounder. Call for service immediately!
CHIME
FIRE
08
08
RESET
FIRE
TROUBLE