background image

 

 

Portable DVD Player

 

Symptom and Correction   

* Failed to Play   

  1. Check to make sure that the disc is properly placed; 
  2. Place the disc on the disc tray with the playback side down; 
  3. Clean the disc if there’s dirt on disc; 
  4. Check to see if the disc is broken, distorted or scratched; 
  5. Check to see if the disc format supports for playback mode; 

* Failed to Respond to Remote Control   

  1. Remove the obstacles between remote control and unit; 
  2. Aim remote control at the sensor on the front panel; 
  3. Check battery and replace them if necessary; 

  * Failed to Play SD/MS/MMC Card or USB   

  1. Check to make sure that the SD/MS/MMC Card or USB is fully and accurately inserted and in place, 

yet its socket contact is in good condition; 

  2. Whether its stored file format is supported by the unit, and correctly operated; 

* Failed to Startup 

  1. Check to see if the switch is toggled at the ON position; 
  2. Whether it is caused due to the low battery level, and unit automatically run the detections to power 

off. 

* Picture Rolling or No Color 

  1. Be sure the outlet AV line is correctly connected, and its plug is inserted in place; 
  2. Make sure the Color System of this unit conforms to the set, and select the appropriate color system; 
 

* Screen Mess, Disc Jamming and Halted, Buttons No Respond     

  1. Check to make sure that this problem is caused due to scratched, dirt and distorted of disc; 
  2. Or whether caused due to low battery; 
  3. Please restart the unit and operate the unit as the normal way.   

Specifications 

Files Support 

DVD+R/W, DVD-R/W, DVD, CD-R, CD-RW, VCD, 

SVCD, PHOTO-CD, JPEG, MP3, MPEG4, DIVX 

TV System 

ISDB 

Specification 

Aerial Impedance 

75ohm 

U disk/Card Memory 

Up to 8 G(Max) 

 

Allowable Operating 

Temperature 

Scope 0-40

 

Power Supply 

AC Adaptor 

Input 100-240V    50Hz/60Hz,Output DC 12V/1.5A 

Power Consumption 

Consumption 

DVD Play <18W 

 

 13

Summary of Contents for NPL-9073















Reviews: