10
W415-0527 / A / 04.14.11
!
WARNING
APPLIANCE SCREENS MUST BE CLOSED WHILE THE APPLIANCE IS IN OPERATION.
THE APPLIANCE MUST NOT BE USED WHEN THE HOOD IS REMOVED.
THE HOOD MUST NOT BE MODIFIED OR REPLACED WITH A HOOD THAT MAY BE PROVIDED WITH
THE UNVENTED DECORATIVE ROOM HEATER.
4.1 HOOD
INSTALLATION
1
2
Note: Remove the hood from the back side of the
carton by cutting the cable ties holding it in place.
A.
Slide the edge of the hood into place on the top
inside surface of the ventless fi rebox enclosure to
align with the three pre-drilled holes.
B.
Screw the hood securely into place with the three
screws provided.
!
WARNING
RISK OF FIRE!
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALS
SUCH AS BRICK, MARBLE, GRANITE, ETC., PROVIDED THAT THESE MATERIALS DO NOT GO
BELOW THE SPECIFIED DIMENSION AS ILLUSTRATED. AS AN ALTERNATIVE, YOU CAN FINISH THE
APPLIANCE WITH DRYWALL, SEE ILLUSTRATIONS TO FOLLOW.
FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.
72.2
4.0 FINISHING
