![background image](http://html1.mh-extra.com/html/napoleon/vector-series/vector-series_installation-manual_4221456038.webp)
W415-2034 / A / 10.18.19
EN
38
electrical information
Install the battery holder/switch into
a standard electrical switch box.
Determine an appropriate location and
install the electrical box.
(4) AA
Batteries
ON REMOTE OFF
AFET
Y BARRIER
8 feet maximum
to the side of
the appliance
(must be accessible for
programming the r
emote)
(4) AA
Batteries
ON REMOTE OFF
6.4
battery holder/switch installation
Ensure the 3 position slider switch is
in the “REMOTE” position (middle).
note:
6.5
initializing the battery holder/switch for the fi rst time
(4) AA
Batteries
A.
Install the 4 AA batteries into the battery holder, note the polarity of the batteries and insert as indicated
on the cover (+/-).
B.
Ensure the 3 position slider switch is switched to the “REMOTE” position (middle position).
C.
Press the reset/programming button, use a small object such as a paper clip in order to reach the button
marked PRG, as shown in the illustration below.
D.
The battery holder will beep 3 times to indicate that it’s ready to synchronize with the remote.
E.
Install the 3 AAA batteries into the remote, as shown in the photograph below, then press the ON button,
The battery holder will beep 4 times to indicate that the remote’s command is accepted.
Remote
Reset / Program
Button (PRG)
Battery Holder
Slider Switch
The initializing process must be completed within 10 seconds of pressing the reset / program (PRG).
note: