4. Transformer/Rear Cart Panel Installation
Install the transformer onto the rear panel as illustrated using (4) M4 x 8mm screws and (4) M4 lock nuts. Route the power
cord through the rubber grommet in the rear panel.
Fit the rear cart panel between the two end panels; ensure the large holes in the rear panel are to the bottom of cart as
illustrated. Fasten using (6) #14 x 1/2” screws, three on each side.
3. Rear Cart Panel Installation
4. Front Cabinet Support Installation
Fit the rear cart panel between the two end panels. Ensure the large holes in the rear panel are to the bottom
of cart as illustrated. Fasten using (9) #10-24 x 3/8” screws, three on each side.
Fasten top rail assembly to the front of the side panels using (4) #10 -24x 3/8” screws. For ease of installation
start all screws (4) #10-24 X3/ 8” before tightening.
30
www.napoleongrills.com
9 x N570-0042 (#10-24 x 3/8”)
4 x N570-0042 (10-24 x 3/8”)
Summary of Contents for T495SBN
Page 46: ...46 www napoleongrills com PARTS DIAGRAM ...
Page 49: ...49 www napoleongrills com PARTS DIAGRAM ...
Page 50: ......