W415-2917 / 07.29.20
EN
12
installation
W all mounting installation template
It is strongly recommended that the rear wall bracket be screwed into the wall studs where possible. If the
wall studs cannot be used, ensure that the plastic anchors (supplied) are used to affix the bracket to the wall
and the bracket is adequately secured.
note:
3. Using the wall mounting installation template
(Fig. 2)
, mark out the locations of the rear wall bracket and bot-
tom brackets on the wall.
4. Install the rear wall bracket onto the wall using 14 screws (supplied).
5. Install the bottom brackets onto the wall using 4 screws (supplied).
The rear wall bracket MUST have hooks facing upward and be level.
note:
Fig. 2
＠
⑥
⑨
A x14
＠
⑥
⑨
A x4
NEFS32-5019W Surround Illustrated
Fig. 2
NEFS32-5320BW Surround Illustrated