6
W415-0257 / 08.02.01
OPTIONAL FAN INSTALLATION
Provision has been made on the stove to install an op-
tional blower that comes complete with a variable speed
switch to turn the blower on and off as well as adjusting the
blower speed. An optional thermostatic sensor control kit,
BGD36, to thermally activate the fan is also available.
Use of the fan increases the output of heat. Attach the mount-
ing bracket to the blower assembly. Then attach to the back
of your stove, push on the variable speed knob and plug
into any grounded electrical outlet.
Note: if the optional blower, EP62-1, is installed, then
the blower guard (W320-0011) must
must
must
must
must be installed. This
guard is available from your Napoleon dealer.
Drywall dust will penetrate into the fan bearings, caus-
ing irreparable damage. Care must be taken to prevent
drywall dust from coming into contact with the fan or its
compartment. Any damage resulting from this condi-
tion is not covered by the warranty policy.
ADJUSTING DOOR CLOSING PRES-
SURE
The door mounting screw acts as a cam to position the
door latch. A half turn clockwise of the screw takes the latch
to a maximum closing pressure; a half turn counter clock-
wise turn takes it to the lowest closing pressure.
FIGURE 9
DOOR MOUNT-
ING SCREW
FIGURE 10
VARIABLE
SPEED
SWITCH
Summary of Contents for Savoy
Page 12: ...12 W415 0257 08 02 01 NOTES ...
