background image

5

5

6

6

Parts names 

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Indoor unit

NOTE:

            All the pictures in this manual are for 
            explanation purpose only. Your air 
            conditioner may be slightly different. 
            The actual shape shall prevail.

1.   Front panel
2.   Air inlet
3.   Air filter(under the  panel)
4.   Air outlet
5.   Horizontal air flow grille
6.   Vertical air flow louver(inside)
7.   Display panel 
8.   Connecting pipe, drain hose

9.   Connective cable
10. Connecting  pipe
11. Stop valve

Indoor unit

Outdoor unit

8

NOTE: The indoor unit you purchased would like one of the following. There is a slightly
difference on front panel and display window, but the features are the same.

9

10

11

Outdoor unit

  Air inlet(rear)

  Air inlet(side)

  Air outlet

(A)

(B)

4

3

5

2

7

1

6

defrost

timer

auto

run

timer

auto

ion

def.

Frequency display:

This display is separated into five zones. 
The zones illuminate based on the 
compressor current frequency. For example, 
higher frequency will illuminate more zones.

Indicator Lights on Display panel

NOTE:

The display panel of the indoor 

unit you purchased may be look like
one of the following: 

11

  Signal 
receptor

2

3

4

defrost

timer

auto

run

timer

auto

ion

def.

(A)

(B)

(C )

run

ion

timer

def.

Auto indicator:

This indicator illuminates when the air 
conditioner is in AUTO operation.

Timer indicator:

This indicator illuminates when TIMER 
is set ON/OFF.

Defrost

 

Indicator

 

(For cooling& heating model only): 

This indicator illuminates when the air 
conditioner  starts  defrosting automatically 
or when the warm air control feature is 
activated in heating operation. 

 

DIGITAL DISPLAY:

  

 

 

Displays the current setting temperature 

  

and malfunction/protection code when the

  

 

 

air conditioner is in operation.
Displays the room temperature under fan only
mode.

1

2

3

4

Ion Indicator

 

Lights up when Ion feature is activated and 

Ionizer can generate abundant anions to fill 
the room with refreshing and natural air.

NOTE: 

This function is only available for 

air conditioner adopts Ionizer.

run

ion

timer

def.

AUTO indication lamp

Lights up during the Auto operation.

  

   

 

RUN indication lamp

This lamp  illuminates when the air 
conditioner is in operation.

TIMER indication lamp

Lights up during Timer operation.

Ion indication lamp(optional function)

Lights up when Clean Air feature is 
activated and Ionizer can generate 
abundant anions to fill the room with 
refreshing and natural air.

DEFROST indication lamp

(For cooling & heating models only): 

Lights up when the air conditioner starts  
defrosting automatically or when the warm 
air control feature is activated in heating 
operation. 

Summary of Contents for Room Air Conditioner































Reviews: