14
EN
www.napoleon.com
N415-0539 SEP 25.20
Illuminati on Instructi ons
Moti on sensor and Knobs, Oven and Cabinet Lights
Turn the Power Switch ON located on the box inside the grill cabinet.
A red and a blue LED light will turn on. Illumina� on se� ngs are in
Default mode.
Select Knob light mode
by holding down the
switch to toggle from
blue
to
white
to
green
.
Release it on the desired mode.
Go back to Default mode:
by holding down the
bu� on for 2 seconds
.
•
The logo and knobs lights work as a set, However you can also turn the logo light off while keeping
the knobs lights on.
• When you have the knobs on the
Color spectrum mode
the knobs will slowly cycle through the color
spectrum, star� ng at green.
•
Quickly Press
Twice
to stop the spectrum at any color you choose
•
Press twice again to let it con� nue changing colors.
Moti on Sensor
•
The knob and logo lights will remain ON as long as mo� on is detected
within 1 meter of your grill. They will turn off a� er 15 minutes of inac� vity.
•
While the mo� on sensor is ON (as indicated by the blue LED), you can turn
the oven and cabinet lights on and off with the
switch.
• Press the
bu� on in the box to turn the sensor OFF.
• Now all your lights are controlled with the
switch.
•
The oven and cabinet lights will turn off a� er two hours.
•
If the mo� on sensor is OFF, the knob and logo lights will also
shut off a� er two hours.
Brightness:
Press the
bu� on to change brightness
between high (100%), medium (65%) and low (35%).
This can only be changed when the knob lights are in
White or Blue Mode
Logo light ON/OFF
Selecti ng a color
Kn
ob
an
d L
ogo
Lights
work togeth
er
If
th
e P
ow
er Switch is OFF
the ignition will
no
t w
or
k
Default mode
• Knob light mode Blue
• Brightness on high
•
Mo� on Sensor is ON
• Logo light is ON
Knob lights modes
• Blue
• White
•
Green - color spectrum mode
Brightness can be adjusted in these modes only
Illuminati on modes
•
Double click the
bu� on to turn the logo light OFF at any � me.
Double click
again to turn it back on.
•
If the unit is powered OFF and ON again (main power switch), the logo light will
return to its default mode.
