background image

www.napoleongrills.com

8  

EN

Lighting Hole

Igniter

Left Burner

Right Burner

Lighting Instructions

Off Position

WARNING!

 Open lid

WARNING!

 Ensure all burner controls are in the off position. Slowly turn on the gas 

supply valve.

Main Tube Burner

Lighting

Rear Burner Lighting

(if equipped)

Main Infrared Burner 

Lighting

(if equipped)

Side Burner Lighting

(optional)

1. Open grill lid

1. Open grill lid

1. Open grill lid

1. Open burner cover.

2. Turn left burner control 

to high position.

2. Remove warming 

rack.

2. Turn infrared burner 

control to high position.

2. Turn side burner 

control to high position.

3. Press and hold

igniter button until burner 

lights, or light by match.

3. Turn rear burner 

control to high position.

3. Press and hold

igniter button until burner 

lights, or light by match.

3. Press and hold

igniter button until burner 

lights, or light by match.

4. If ignition is not 

immediate, turn burner 

control off.  Wait 5 minutes.

Repeat.

4. Press and hold

igniter button until 

burner lights, or light by 

match.

4. If ignition is not

immediate, turn burner 

control off.  Wait 5 

minutes. Repeat.

4. If ignition is not

immediate, turn burner 

control off.  Wait 5 

minutes. Repeat.

5. With left tube burner 

operating on high, turn the 

center and/or right tube 

burner to high.

5. If ignition is not 

immediate, turn burner 

control off.  Wait 5 

minutes. Repeat.

WARNING!

 The propane cylinder is equipped with an excess flow device.  Unless all burners are 

turned off prior to turning the cylinder on, only small flames and low heat will be achievable.

WARNING!

 Do not use rear burner while operating main burner.

Rear Burner

Summary of Contents for PRESTIGE 308RB





















































Reviews: