Napoleon NPFX24A, Owner'S Manual

Page: 39 / 44

Air Handlers
There are LED indicators on the main board of the indoor unit, which are used to
display the operating status and malfunction information of the unit.
LED indicator Color Function
Power Indicator Red
Indoor unit main board is powered on,
Power Indicator is on.
Running Indicator Green
After detecting the indoor fan turn-on
signal, the running indicator light is on,
when detecting the indoor fan turning-off
signal, the running indicator light is off.
When detecting a system failure, the
running indicator light flashes.
Different running indicator flashing light means different system failure.
malfunction Running Indicator status Remark
Indoor Jumper cap failure Light out 3S then flash
once
Flash means light on
0.5S then light out 0.5S
Indoor fan failure Light out 3S then flash
twice
Indoor tube temperature
sensor failure
Light out 3S then flash
four times
Indoor air outlet
temperature sensor failure
Light out 3S then flash six
times
7 Maintenance and Care
Regular check, maintenance and care should be performed by professional
personnel, which will prolong the unit life span.
7.1 Drain Pipe
Regularly check if the drain pipe is clogged in order to drain condensate smoothly.
7.2 Notice before Seasonal Use
(1) Check if the inlet/outlet of the indoor unit is clogged.
(2) Check if the ground wire is earthed reliably.
(3) Check if the filter screen has been set soundly.
(4) Check if the unit is installed firmly. If there is something abnormal, please contact
the local appointed service center.
7.3 Maintenance after Seasonal Use
(1) Cut off main power supply of the unit.
(2) Clean filter screen of indoor units.
34