W415-1755 / 05.03.17
EN
10
installation
4.3 trim kit installation
1. Remove the two screws on one side of the front
glass.
2. Secure the side trim and front glass using the
previously removed screws.
Ensure slots face
inwards and the bottom of the trim is flush with
the bottom of the appliance.
Repeat steps 1 and 2
on opposite side.
4.2 minimum mantel clearances
• When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
!
WARNING
CEILING OR MANTEL
3" 76mm
1/4" 6.3mm
29 3/8”
(74.6cm)
2” 51mm
23 3/8”
(59.4cm)
BOTTOM OF APPLIANCE
TOP OF TRIM KIT