W415-1843 / C / 01.18.22
EN
6
general information
1.3 general instructions
1.4 unpacking and testing appliance
1.5 hardware list
Carefully remove the appliance from the box and remove the support brackets. Prior to installing the appliance,
remove all packaging material and test to make sure the appliance operates properly by plugging the power
supply cord into a conveniently located 120V, 15 Amp minimum grounded outlet.
!
WARNING
• Read these instructions completely before beginning installation. Failure to follow them could cause an
appliance malfunction resulting in serious injury and/or property damage.
• All electric appliances have hot and arcing or sparking parts inside. Do not use it in areas where gasoline,
paint, or fl ammable liquids are present.
• This electric appliance is tested and listed for use only with the optional accessories listed in these
instructions. Use of optional accessories not specifi cally tested for this electric appliance could void the
warranty and/or result in a safety hazard.
• Do not open. Risk of electric shock. No user-serviceable parts inside.
• Do not use damaged electrical cords.
• Servicing should be done only while the appliance is disconnected from the power supply circuit.
• To prevent electric shock, match the wide blade of plug to wide slot of receptacle and fully insert.
Ref.
Description
Quantity
A
Flat head screw
5
B
Drywall anchor
5
C
Phillips head screw
5
D
Center stand piece
1
E
Tempered glass base
1
Only hardware supplied with the appliance will be illustrated.
note:
Summary of Contents for NEFL B-1
Page 18: ...W415 1843 C 01 18 22 EN 18 replacement parts...
Page 22: ......
Page 40: ...W415 1843 C 01 18 22 EN 40 pi ces de rechanges...
Page 44: ......
