32
W415-0695 / A / 06.07.10
6.3 DECORATIVE BRICK PANEL INSTALLATION
6.3.1
Remove the hearth strip / screen assembly and glass door. (Refer to lea
fl
et).
6.3.2
Remove the andiron / grate assembly by removing the
2 screws located behind the andirons.
6.3.3
Remove the right log bracket, as shown. Note the posi-
tion of the securing screw in the bracket.
6.3.4
Install the right, left and centre hearth bricks into the
fi
rebox, as illustrated. The hearth should appear seam-
less across the front. Ensure that a ¼” space exists be-
tween the hearth bricks and the perimeter of the burner.
6.3.5
Ensure that the tabs, located on the back wall of the
fi
rebox, have been bent forward horizontally.
6.3.6
Install the panels in the following order:
A
- RIGHT
B
- REAR
C
- LEFT
D
- BAFFLE
6.3.7
Secure the side panel using the retainers located in the
top
left and right corners of the
fi
rebox.
6.3.8
Replace the components removed in
steps 2 - 3.
6.3.9
Remove one end of the hearth assembly
so that the three front concrete hearth
pieces can
be inserted, then replace the
end.
NG
NG
LP
LP
LOG
LOG
BRACKET
BRACKET
ANDIRON
ANDIRON
/ GRATE
/ GRATE
MOUNTING
MOUNTING
SCREW (
SCREW (
X
X
2)
2)
SECURING
SECURING
SCREW
SCREW
TAB
TAB
LEFT
LEFT
CENTR
E
CENTRE
RIGHT
RIGHT
¼"
¼"
AIR
AIR
SPACE
SPACE
FRON
T HE
ARTH
FRONT HEARTH
A
D
B
C
RETAINER
RETAINER
