30
W415-1624 / D / 11.22.16
EN
EN
16 3/16"
41.1cm
75 1/4"
191.1cm
MINIMUM
65 3/4"
167cm
50 3/8”
128cm
MINIMUM
CLEARANCES TO COMBUSTIBLE FRAMING
AND SIDES OF VENTING MUST BE A
MINIMUM OF 1”. WHERE NOT POSSIBLE
METALS STUDS ARE REQUIRED.
NOTE: TOP HEADERS AND REAR SIDE FRAMING
MUST BE INSTALLED AFTER FIREPLACE
HAS BEEN POSITIONED.
NOTE:
• Power vent system available with reduced vent pipe clearances. Contact your authorized
dealer/distributor for more information.
IMPORTANT: Before fi nishing in the appliance test the operation using the remote control, cycling it
through all of its different modes, see “OPERATION” section. Should trouble shooting be required,
access to the controls can be made through the pre-fi nishing access panel.
!
WARNING
METAL STUDS MAY BE REQUIRED TO ENSURE CLEARANCE TO COMBUSTIBLES.
See section “VENTING” for vent clearances.
