EN
W415-1366 / D / 12.07.18
13
fi nishing
3.3 log
placement
PHAZER
TM
logs and glowing embers exclusive to Napoleon Fireplaces, provide a unique and realistic glowing effect that is
different in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect.
Log colours
may vary. During the initial use of the fi replace, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
A.
Place the rear log (W135-0136) onto the two log
supports and against the air intake pipe.
B.
Position the left log (W135-0137) and the right log
(W135-0138) against the grate posts and line up the
studs located on the burner with the holes on the
bottom of the logs. Keep slightly back of the front
row of ports.
C.
Fit the centre log (W135-0139) into place behind the
left log and into the pocket provided on the rear log.
Tear the embers into pieces and place along the front row
of ports covering all of the burner area in front of the logs.
Care should be taken to shred the embers into thin, small
irregular pieces as only the exposed edges of the fi bre
hairs will glow.
The ember material will only glow when
exposed to direct fl ame; however, care should be
taken to not block the burner ports.
Blocked burner ports can cause an incorrect fl ame
pattern, carbon deposits and delayed ignition.
PHAZER
TM
logs glow when exposed to direct fl ame. Use only certifi ed "glowing embers" and
PHAZER
TM
logs available from
your authorized dealer / distributor.
3.4 glowing
embers
GLOWING EMBERS
B
B
A
C
!
WARNING
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.