Napoleon BIPRO500-3, Manual

Page: 18 / 72

18
EN
www.napoleon.com N415-0541 JUL 17.20
BUILT-IN UNIT OPENING DIMENSIONS
MODEL OPENING DIMENSIONS NOTES
W D H
BIP / BIPRO500 30 3/4”
781 mm
20 5/8”
524 mm
8 7/8”
225 mm
WITHOUT ZERO CLEARANCE LINER
SIDE BURNER 12 3/4”
324 mm
16 1/2”
419 mm
4 1/2”
114 mm
OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR
COMBUS TION AIR FOR SIDE BURNER.
MINIMUM 10 SQ IN OF
VENTILATION REQUIRED
ON EACH END OF CABINET
WARNING!
A propane tank
can not be stored below the gas
grill.
WARNING!
CABINET FRAME, CABINET
AND COUNTER TOP MUST BE MADE FROM
NON-COMBUSTIBLE MATERIAL WHEN NOT
INSTALLED WITH THE ZERO CLEARANCE LINER PART
NO. BI-3323-ZCL
W
W
H
H
W
H
D
1¾”
(44mm)
BUILT-IN SIDEBURNER
GAS INLET OPENING
OUTDOOR GFI ELECTRICAL OUTLET
REC OMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
GAS INLET
OPENING
Note: Accessory frames
overlap opening by 1 ¾”
on all 4 sides.
34” (864mm)
RECOMMENDED
5” (127mm)
1¾”
(44mm)
OPENING FOR WIRES
(2” (51mm)
D
ELECTRICAL OPENING
4” (102mm)
!
!
!
!
WARNING!
This grill is designed for installation in a built-in enclosure constructed of combustible
materials when installed with zero clearance liner Part No. BI-3323-ZCL and must be installed and ser -
viced by a qualified installer to local codes.
WARNING!
WARNING! If not installing with the Zero Clearance Liner, use only non-combustible
materials (certified to ASTM E-136) when finishing the appliance (e.g. steel studs, cement board, ce -
ramic tile, marble, paint, etcetera). Do not use wood or drywall.
4” (102mm)