Napoleon BIPRO500-3, Manual

Page: 10 / 72

10
EN
www.napoleon.com N415-0541 JUL 17.20
Illumination Instructions
Motion sensor and Knobs and Oven Lights
Turn the Power Switch ON located on the control box.
The control box should be to the left side of the inside of your cabinet, where the grill
head has been mounted on.
(See control box installation section in this manual for further reference).
A red and a blue LED light will turn on. Illumination settings
are in
Default mode.
Default mode
• Knob light mode Blue
• Brightness on high
• Motion Sensor is On
Knob lights modes
• Blue
• White
• Green - color spectrum mode
Select Knob light mode
by holding down the
switch to toggle from
blue
to
white
to
green
.
Release it on the desired mode.
Go back to Default mode:
by holding down the button for 2 seconds
.
Brightness can be adjusted in these modes only
• When you have the knobs on the
Color spectrum mode
the knobs and the logo will slowly cycle
through the color spectrum, starting at green.
• Quickly Press Twice
to stop the spectrum at any color you choose
• Press twice again to let it continue changing colors.
Motion Sensor
• The knob and logo lights will remain ON as long as motion is detected
within 1 meter of your grill. They will turn off after 15 minutes of inactivity.
• While the motion sensor is ON (as indicated by the blue LED), you can turn
the oven lights on and off with the
switch.
• Press the button in the box to turn the sensor OFF.
• Now all your lights are controlled with the switch.
• The oven lights will turn off after two hours.
• If the motion sensor is OFF, the knob and logo lights will also
shut off after two hours.
Brightness:
Press the button to change brightness
between high (100%), medium (65%) and low (35%).
This can only be changed when the knob lights are in
White or Blue Mode
Illumination modes
Selecting a color
Kn
ob
an
d L
ogo
Lights
work togeth
er
I
f t
he
Po
wer
S
w
i tch
i
s
OFF
the
i
g
ni
t i
o
n
w
ill
n
ot
w
or
k
• The logo and knobs lights work as a set, However you can also turn the logo light
off while keeping the knobs lights on.
Logo light ON/OFF
• Double click the
button to turn the logo light OFF at any time.
Double click
again to turn it back on.
• If the unit is powered OFF and ON again (main power switch), the logo light will
return to its default mode.