Napoleon BIPRO 500, Instruction Manual

Page: 8 / 56

8
www.napoleongrills.com
EN
Lighting Instructions
Off Position
WARNING!
Open lid
WARNING!
Ensure all burner controls are in the off position. Slowly turn on the gas
supply valve.
Main Burner
Lighting
Rear Burner Lighting
(if equipped)
Side Burner Lighting
(optional)
1. Open grill lid 1. Open grill lid 1. Open burner cover.
2. Push and turn any main burner
knob slowly to the high position. If
the pilot lights, continue to push
down on the control knob until the
burner lights and then release.
2. Remove warming rack. 2. Turn side burner control to high
position.
3. If the pilot does not ignite, then
immediately turn the control knob
back to the ‘off position and repeat
step 2 several times.
3. Turn rear burner control to high
position.
3. Press and hold
igniter button until burner lights, or
light by match.
4. If the pilot and burner will not
ignite within 5 seconds, turn the
control knob to the ‘off’ position
and wait 5 minutes for any excess
gas to dissipate. Either repeat steps
2 and 3 or light with a match.
4. Press and hold
igniter button until burner lights, or
light by match.
4. If ignition is not
immediate, turn burner control off.
Wait 5 minutes. Repeat.
5. If lighting the unit with a
match, clip the match into the
supplied lighting rod. Hold the
lit match down through the grill
and sear plate while turning the
corresponding burner valve to high.
5. If ignition is not immediate, turn
burner control off. Wait 5 minutes.
Repeat.
WARNING!
Do not use rear burner while operating main burner.
Igniter
Left
Burner
Right
Burner
Left Centre
Burner
Rear
Burner
Right Centre
Burner
Lights