17
EN
www.napoleon.com
N415-0597CE-GB-DE Nov 04.20
BILD485 BUILT-IN INSTRUCTIONS
This grill is designed for masonry,
NON-COMBUSTIBLE
enclosures only
when not installed with the zero clearance
liner
and must be installed and serviced by a qualified installer to local codes.
1.
Attach side mounting brackets to each side of the grill using #1/4-20 x 3/8” screws (N570-0073).
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to
each wing of the rear trim.
3. Lower the unit in place, the wings on the rear trim should be under the side mounting brackets. Connect the flex
supply line to the fitting at the end of the manifold.
4.
The entire installation must be leak tested before operating the unit.
10mm
N570-0073 (1/4-20 X 3/8”)
x6
!
!
APPLY A DAB OF SILICONE
TO EACH FLANGE TO
SECURE IN PLACE.
