15
W415-0275 / E / 07.13.10
!
WARNING
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN HEATER. DO NOT CHANGE FROM THE
PROPER LOG POSITIONS, SINCE HEATER MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
PHAZER
TM
logs and glowing embers exclusive to Continental Fireplaces, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect.
Log colours
may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
TAB
SIDE VIEW
6.2.1
Place the back log (#1) onto the
log support tray and in front of
the tabs. The tabs maintain an
air space between the log and
fi rebox back to facilitate com-
bustion air fl ow. Ensure that the
back of the log rests against
the brackets on the back wall of
the fi rebox.
6.2 LOG
PLACEMENT
6.2.2
Move the two small logs (#2 & #3) into posi-
tion, lining up the studs located on the burner
with the holes on the bottom of the logs. En-
sure that the small logs sit fl at on the burner.
6.2.3
Place the bottom of the left crossover log (#4)
against the left fi rebox side and pulled forward
to the grate. The top of the log should rest in
the pocket on the back log.
6.2.4
Position the base end of the center log (#5)
against the middle grate post with the other
end of the log resting in the pocket of the left
crossover log.
6.2.5
Place the bottom of the right crossover log
(#6) against the right fi rebox side and pulled
forward to the grate. The top of the log should
rest in the pocket provided on the center log
(#5).