A.
Remove the door
(refer to installation
instructions). Remove
the 8 securing
screws and lift the
plate up and out of
the appliance. The
gasket will need to be
replaced if damaged.
A.
Attach the burner assembly to the fi rebox
base with the 4 screws supplied.
This burner and log assembly are approved for use in the HDX52-1 gas appliance only. They are not approved for
use as a stand alone appliance or in conjunction with any other appliance.
1.0 general information
2.0 installation
2.1 access
panel
2.2 burner
assembly
1.0 general
information
2
2.0 installation
2
2.1 access
panel
2
2.2 burner
assembly
2
2.3 bulkheads
3
2.4
hearth panel installation
4
2.5
hearth log & log placement
5
2.6 charcoal
lumps
7
2.7 charcoal
embers
7
2.8 vermiculite
7
2.9 glowing
embers
7
3.0 adjustment
8
3.1 fl
ame
characteristics
8
3.2 venturi
adjustment
8
4.0 replacement
parts
9
4.1 overview
10
4.2
B52NL-1 log burner
11
INSIDE APPLIANCE
OUTSIDE APPLIANCE
E
W415-2745 / A / 11.04.19
EN
2
table of contents
!
WARNING:
This product can expose you to chemicals including lead and lead compounds,
which are known to the State of California to cause cancer, and chemicals including carbon
monoxide, which are known to the State of California to cause birth defects or other reproduc-
tive harm. For more information, go to www.P65Warnings.ca.gov.
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial are denoted by a vertical line in the margin.
note:
