EN
W415-3031 / 04.30.21
13
installation
3" (76.2mm)
minimum
Side View (recessed into a wall)
Brackets
B
A
B
A
C
2.5 installing the appliance into the wall (recessed)
FINISHING MATERIAL
(NON-LOAD
BEARING)
Model No.
A
B
C
NEFVC32H-EU
30 3/4" (78.1cm)
14 1/2" (36.8cm)
3 1/2" (8.9cm) min.
NEFVC38H-EU
36 3/4" (93.3cm)
Measurements from body of appliance:
Sides, Back, Top
0”
1. Remove the side covers secured to the back of the
appliance and discard.
2. Insert the appliance into the recess, and then mark
the top and bottom bracket locations. Remove the
appliance from the recess and set aside on a soft,
non-abrasive surface.
3. Remove the top and bottom brackets
(Fig. 1)
.
4. Using the top and bottom bracket location markings
from Step 2, install the top and bottom brackets to
the wall using 4 wood screws (supplied).
5. Re-insert the appliance into the recess, and then
secure it to the top and bottom brackets
(Fig. 1)
.
Top Bracket
Bottom Bracket
Top Bracket
Bottom Bracket
Fig. 1