A. Assemble the awning poles by
unfolding each section.
B. Place the end of the pole with the
pin through the grommet hole at the
corner of the awning.
C. Place the ring end of the guy line
over the pole pin located at the top
of the awning. Place the awning cap
over the pin.
A. Stake the bottom loop of the guy
line (bottom portion of plastic slider)
to the ground with a peg. Repeat for
all awning guy lines.
B. Adjust the lenth of the rope by
pushing the plastic slider upwards
until the line is tight.
16
17
To install the gear loft, place each
corner hook of the gear loft into
the loop located on the ceiling of
the tent.
18
setting up the awning
BEFORE
YOU BEGIN
For set up video,
scan QR code or visit
www.napieroutdoors.com
17 B
17A
16 c
