Lay the tent flat inside the bed of the truck, ensuring
the front door is at the tailgate.
Locate the tent side straps (3 per side) and loosely
attach each to the truck’s body.
Locate the tent tailgate straps (3). Slide the 3 back
straps between the truck box and the tailgate (you
may need to lift the tailgate). Locate the front straps
at the end of the tailgate
and connect to the
corresponding back
strap under the
tailgate.
3
1
PACKAGE CONTENTS
tent set up
2
TENT BAG
TENT TIE STRAPS (2)
TENT
POLE BAG
STAKE BAG
TENT POLES (6)
AWNING POLES (6)
RAINFLY
GEAR LOFT
GUY LINES (4)
STAKES (4)
AWNING POLE
CAPS (2)
Blue (2)
150-178” Corner-To-Corner
Green (1)
67-75” Side-to-Side
Grey Short (1) 82-89” Rear Cab
Grey Long (1) 149-153” Vestibule/Tailgate
Black (1)
82-115” Inside
Navy Blue (2) Fiberglass: Inside
Blue (2) Steel: Top
Blue (2) Steel: Bottom
Remove contents from the bag and ensure you have all components listed below.
If you are missing parts, please contact Napier Outdoors at 800-567-2434 | Monday - Friday or email customerservice
@
napieroutdoors.com
For an easier assembly, set the tent up on the
ground, completing steps 1-3 last.
NOTE: Do not attach pole clips until all poles are in place in their pockets (step 7). Failure to do so will create too much tension and may cause pole to break.
