A. Assemble the awning poles by
unfolding each section.
B. Place the end of the pole with the
pin through the grommet hole at the
corner of the awning.
C. Place the ring end of the guy line
over the pole pin located at the top
of the awning. Place the awning cap
over the pin.
A. Stake the bottom loop on the
plastic slider of guy line with a peg.
B. Adjust the lenth of the rope by
pushing the plastic slider upwards
until the line is tight.
16
17
To install the gear loft, place each
corner hook of the gear loft into
the loop located on the ceiling of
the tent.
18
setting up the awning
17 B
17A
16 c
