background image

Revision #5 
Sept 15, 2009

Customers agree to hold Outdoor Living Today and any Authorized Dealers free of any 
liability for improper installation, maintenance and repair of any Outdoor Living Today 
products.

Note:

Post Mounting Hardware is 

NOT 

included in this kit. Please confirm with your

local building permit office to determine the correct hardware in your area.

If you plan to paint or stain your Pergola before assembly, be sure to scribe or mark the
top edge of Joist where Stub Joists and Ladder Blockings are pre-marked. Painting or
staining may cover up markings, making it more difficult to align components later.

In the event of a missing or broken piece, simply call the Outdoor Living Today
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your 
purchase. It is our commitment to you to courier replacement parts, free of charge, 
within 10 business days of this notification. Replacement parts will not be 
provided free of charge after the 30 day grace period. 

12X20 Breeze Pergola

Assembly Manual

Outdoor Living Today

Toll Free 1-888-658-1658            www.outdoorlivingtoday.com            [email protected]

Page 1

Summary of Contents for 12X20 Breeze Pergola















Reviews: