13.
On a flat surface, position
Ladder Blocking (F)
where marked on Main Joist (D) and screw with
2 - 2 1/2” screws per piece. Blocking should be flush
with top and bottom of Main Joist with all notches
facing down.
F
D
D
14.
Complete all 8 Ladder Sections on
the ground prior to moving to
Step 15.
Completed Ladder Section
2 - 2 1/2”
screws
per side
Joist is pre-marked for
blocking placement.
15.
Carefully lift up one of
the Ladder Sections between
Girders.
You will require a
helper to assist in lifting
Ladder Sections.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 8
