X
GEM-X255 Programming Instructions
L
NAPCO Security Systems
Page 8
WI1092E 10/05
GEM
-RP1
C
A
E
2
/GE
M-
K1
C
A
KE
YP
A
D
E
A
SY PROGR
A
M MENU
Enable SIA CP-01 Features?
•
Press the NEXT/YES button to enable.
•
Press the PRIOR/NO button to continue.
The SIA CP-01 Features are designed to reduce the incidence of false alarms.
NOTE:
Do not enable
unless reporting, otherwise system trouble
Fail to Communicate
may occur.
Number of Keypads in Area 1
•
Enter the total number of Keypads to be installed in Area 1.
•
Valid entries are from 01 to 15. Directly enter the number of keypads, including leading zeros.
Press
U
to save. Press the NEXT/YES button to proceed.
Number of Keypads in Area 2
•
Enter the total number of Keypads to be installed in Area 2.
•
Valid entries are from 00 to 15. Directly enter the number of keypads, including leading zeros.
Press
U
to save. Press the NEXT/YES button to proceed.
NOTE:
Area 2 keypads must have zones in
Area 2, otherwise the keypad will indicate "Out Of System".
Central Station Receiver 1 Telephone Number
•
Enter telephone number of up to 16 digits.
•
Press
1
through
9
for digits 1–9;
G
0
for a zero and
0
for a blank (
•
).
•
Press
G
1
through
G
5
for letters B–F, respectively.
•
Pre-Dial Delay = “D” (
G
4
); Dial-Tone Detection = “E” (
G
5
).
•
Press
U
to save and press the NEXT/YES button to proceed.
NOTE:
Central Station Receiver 2 and 3 Telephone Numbers must be entered in Direct Address Program-
ming.
See CS Receiver Options.
(Direct Entry)
Centr al Phone #
(Direct Entry)
# Are a 1 Keypad s
Enter # KPs 0 1
(Press YES or NO)
Enable SIA CP-01?
Y/N
(Direct Entry)
# Are a 2 Keypad s
Enter # KPs 0 0
Easy Programming of Auto download ID #'s and PC Preset Callback Numbers
(GEM-RP1CAe2 or GEM-K1CA
keypads only) from the Central Station Telephone number.
For unattended PC Preset downloading, it is now possible to set the Auto download ID #’s and PC Preset Callback
from the Keypad Easy Program Mode.
•
At the field for CENTRAL PHONE #, program an "F" followed by the Auto Download ID # (2 digits) and then the
Callback Telco # (up to 13 digits).
•
Press
D
or
U
to save.
•
Exit Program Mode (
CC
)
•
Enter Master Code
•
Press
A
or
R
•
Go to Function "ACTIVATE DOWNLOAD Y/N" and press YES (
E
or
P
).
•
The panel will automatically call the PC Preset computer and download the program on the specified Auto
Download line # of PC Preset. Example: Program an Auto download ID # of 07 and a PC Preset Callback # of
1-516-842-9400
•
Go to Central Phone # input screen and press: [*] [5] [0] [7] [1] [5] [1] [6] [8] [4] [2] [9] [4] [0] [0]
D
(or
U
).
CENTRAL PHONE #
F 0 7 1 5 1 6 8 4 2 9 4 0 0
