NAPCO StarLink Connect Series, Getting Started

Page: 16 / 40

16 NAPCO StarLink Fire: Getting Started Guide
Signal Loss Test
This test ensures that the SLECDMA-CFB-PS will indicate a supervisory trouble condition to the FACP and cen-
tral station upon loss of signal within the required time period.
Remove the antenna and observe the following indications:
Reconnect the antenna:
Note: In cases where the radio may be located in close proximity to the cell tower, there is a possibility that the
radio may operate properly, even with the antenna removed.
LED Verify this Condition Passed?
Red Trouble LED D5 Blinks 5 times.
Yellow Trouble LED on
SLE-ULPS-R
Blinks 4 times.
Trouble Relay Output on
SLE-ULPS-R Activates within 5 minutes; check for proper trouble annunciation at
FACP.
Supervisory signal E356 will be received by the central station within
5 minutes of the antenna being removed.
Red Trouble LED D5 Turns off.
Yellow Trouble LED on
SLE-ULPS-R
Turns off.
Trouble Relay Output on
SLE-ULPS-R
Restores; check for proper trouble restoral at FACP.
Supervisory restore signal R356 will be received by the central station
within 5 minutes of the antenna being reconnected.