NAPCO Gemini GEM-K2AS Operating Manual Download Page 36

36 

NAPCO LIMITED WARRANTY 

NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from manufacturing defects 
in materials and workmanship for thirty-six months following the date of manufacture. NAPCO will, within 
said period, at its option, repair or replace any product failing to operate correctly without charge to the 
original purchaser or user. 
 
This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, 
improperly installed, improperly used, abused, altered, damaged, subjected to acts of God, or on which any 
serial numbers have been altered, defaced or removed. Seller will not be responsible for any dismantling or 
reinstallation charges. 
   
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION 
ON THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY 
OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS 
IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF NAPCO. 
   
Any action for breach of warranty, including but not limited to any implied warranty of merchantability, must 
be brought within the six months following the end of the warranty period.  
   
IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL 
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF 
THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT. 
   
In case of defect, contact the security professional who installed and maintains your security system. In 
order to exercise the warranty, the product must be returned by the security professional, shipping costs 
prepaid and insured to NAPCO. After repair or replacement, NAPCO assumes the cost of returning products 
under warranty. NAPCO shall have no obligation under this warranty, or otherwise, if the product has been 
repaired by others, improperly installed, improperly used, abused, altered, damaged, subjected to accident, 
nuisance, flood, fire or acts of God, or on which any serial numbers have been altered, defaced or removed. 
NAPCO will not be responsible for any dismantling, reassembly or reinstallation charges. 
 
This warranty contains the entire warranty. It is the sole warranty and any prior agreements or 
representations, whether oral or written, are either merged herein or are expressly canceled. NAPCO neither 

assumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or to assume 
for it, any other warranty or liability concerning its products. 
 
In no event shall NAPCO be liable for an amount in excess of NAPCO's original selling price of the product, 
for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of any 
failure of the product. Seller's warranty, as hereinabove set forth, shall not be enlarged, diminished or 
affected by and no obligation or liability shall arise or grow out of Seller's rendering of technical advice or 
service in connection with Buyer's order of the goods furnished hereunder. 
   
NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY. 
   

Warning: 

Despite frequent testing, and due to, but not limited to, any or all of the following; criminal 

tampering, electrical or communications disruption, it is possible for the system to fail to perform as 
expected. NAPCO does not represent that the product/system may not be compromised or circumvented; or 
that the product or system will prevent any personal injury or property loss by burglary, robbery, fire or 
otherwise; nor that the product or system will in all cases provide adequate warning or protection. A properly 
installed and maintained alarm may only reduce risk of burglary, robbery, fire or otherwise but it is not 
insurance or a guarantee that these events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO 
LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A 
CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should in turn advise the 
consumer to take any and all precautions for his or her safety including, but not limited to, fleeing the 
premises and calling police or fire department, in order to mitigate the possibilities of harm and/or damage.  
 
NAPCO is not an insurer of either the property or safety of the user's family or employees, and limits its 
liability for any loss or damage including incidental or consequential damages to NAPCO's original selling 
price of the product regardless of the cause of such loss or damage. 
   
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or 
limitation of incidental or consequential damages, or differentiate in their treatment of limitations of liability for 
ordinary or gross negligence, so the above limitations or exclusions may not apply to you. This Warranty 
gives you specific legal rights and you may also have other rights which vary from state to state.        

NAPCO Security Systems, 333 Bayview Avenue,  Amityville,  NY 11701                                                                                                     DESIGN PATS. PENDING 

THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC

.

 

 

This equipment generates and uses radio-frequency energy and, if not installed and used properly, that 
is, in strict accordance with the manufacturer's instructions, may cause interference to radio and 
television reception.  It has been type tested and found to comply with the limits for a Class-B computing 
device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to 
provide reasonable protection against such interference in a residential installation. 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: reorient the receiving antenna; relocate the computer with respect to the receiver; 
move the computer away from the receiver; plug the computer into a different outlet so that computer and 
receiver are on different branch circuits. 
If necessary, the user should consult the dealer or an experienced radio/television technician for 
additional suggestions. The user may find the following booklet prepared by the Federal Communications 
Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems”. This booklet is 
available from the U.S. Government Printing Office, Washington, DC 20402; Stock No. 004-000-00345-4. 

Summary of Contents for Gemini GEM-K2AS





































Reviews: