19
U S E R P R O G R AM M O D E
User Program Mode
Your Installer has programmed into your system a uniquely coded digital Master I-FOB that can be used to not only disarm the system and
silence the siren, but also allows access to the
User Program Mode
. User Program Mode allows you to program various options, such as
adding other User Codes, setting the system Time and Date, enrolling new I-FOB's, etc. The following explains how you can enter User
Program Mode and to program these additional options:
Enter the User Program Mode
1. Insert your Master I-FOB into the Touchpad. Press
MENU
to enter the
Touchpad
Menu Mode
, then remove the I-FOB from the Touchpad.
2. Press
MENU
until “
ACTIVATE PROGRAM Y/N
” is displayed, then press
YES
. “
CHANGE
DATE
” will display indicating that the system is ready to update the first option, the cur-
rent date. Press
YES
to change the date.
Enter Date
1. With “
ENTER DATE (MM/DD/YY)
” displayed in the LCD window, of the two digits repre-
senting the month, the cursor is located under the left digit. Press the
YES
or
NO
but-
tons to increment (or decrement) this left digit as needed. Press
ENTER
move the
cursor to the right.
2. To edit the date, press the
YES
or
NO
buttons to increment (or decrement) the digits as
needed. Press
ENTER
move the cursor to the right, then repeat this process for the
year. When finished, press
MENU
to save, and the next option, "
CHANGE TIME
" will
display. Press
YES
to change the time.
Enter Time
1. With “
ENTER TIME (HH:MM)
” displayed in the LCD window, of the two digits represent-
ing the hour, the cursor is located under the left digit. Press the
YES
or
NO
buttons to
increment (or decrement) the hour digits as needed. Press
ENTER
to move the cursor
ENTER DATE
(00/00/00)
ACTIVATE PROGRAM
Y/N
ENTER TIME
(00:00)
F-64TPBR_OI319A.03_USER_...
page 19
Friday, September 15, 2006 10:39
Composite
