ETW38 and ETW12
6
Rev. 02/27/15
REPlAcING THE HEAD KIT
Step 8:
Fasten the lid to the ratchet head with lid screws.
See fig. 8
Test the functionality by making sure the driver turns and
the switch can pivot in both directions.
Fig. 8
SET uP
1. U = Unit of Measure/Setting
2. + = increase measurement/ UP
- = Decrease measurement/ Down
3. On/Off = Hold for 3 seconds to power off - Hold for 1
second to power on.
3
1
2
BATTERY INSTAllATIoN
• Remove the battery cap.
• Insert two AA batteries (provided) matching the -/+
polarities of the battery to the battery compartment.
• Replace the battery cap and fasten it tightly
according to the illustrations.
BEFoRE uSING THE WRENcH
