Napa 85-100 Owner'S Manual Download Page 2

 

2

 

1. 

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS –

 

This manual will show you how to use your 

memory saver/detector safely and effectively. Please read, understand and follow 

these instructions and precautions carefully. 

WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. 

BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION. 

FOR THIS REASON, IT IS IMPORTANT THAT YOU FOLLOW THESE 

INSTRUCTIONS EACH TIME YOU USE THE MEMORY SAVER/DETECTOR.

• 

Read the entire manual before using this product. Failure to do so could result in 

serious injury.

• 

Use the memory saver/detector in a well-ventilated area.

• 

This memory saver/detector is not intended for use by children.

• 

Do not expose the memory saver/detector to rain or snow.

• 

Do not operate the memory saver/detector if it has received a sharp blow, been 

dropped or otherwise damaged in any way; take it to a qualified service person. 

• 

Inspect the battery for a cracked or broken case or cover. If the battery is 

damaged, do not use the memory saver/detector.

• 

Do not disassemble the memory saver/detector; take it to a qualified service 

person when service or repair is required. Incorrect reassembly may result in a 

risk of fire or electric shock. 

• 

Follow these instructions and those published by the battery manufacturer and 

the manufacturer of any equipment you intend to use in the vicinity of the battery. 

Review the cautionary markings on these products and on the engine.

2. 

PERSONAL SAFETY PRECAUTIONS

• 

Wear complete eye protection and protective clothing when working near lead-

acid batteries. Always have someone nearby for help.

• 

Have plenty of fresh water, soap and baking soda nearby for use, in case battery 

acid contacts your eyes, skin or clothing. Wash immediately with soap and water 

and seek medical attention.

• 

If battery acid comes into contact with eyes, flush eyes immediately for at least 10 

minutes and get medical attention.

• 

Neutralize any acid spills thoroughly with baking soda before attempting to clean up. 

• 

Remove all personal metal items from your body, such as rings, bracelets, 

necklaces and watches. A lead-acid battery can produce a short circuit current 

high enough to weld a ring to metal, causing a severe burn.

• 

Never smoke or allow a spark or flame in the vicinity of the battery or engine. 

Summary of Contents for 85-100

















Reviews: