background image

791-7130 

rev. 12/11/15

WARNING INFORMATION

This is the safety alert symbol. It is used to alert you 
to potential personal injury hazards. Obey all safety 
messages that follow this symbol to avoid possible 
injury or death.

 

          IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING 
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of 
the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost 
or not legible, contact NAPA for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to 
and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator 
comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

The use of attachments, adapters, and accessories with portable automotive lifting devices are subject to certain hazards that cannot be pre-
vented by mechanical means, but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and 
personnel involved in the use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the 
equipment and its proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, 
overloading, off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

 

•  Read, study, understand and follow all instructions before operating this device. 

 

•  Inspect before each use. Do not use adapter if damaged, altered, modified, in poor condition, or has loose or missing hardware or  

 

  components. Take corrective action before using the adapter. 

 

•  Do not use adapter beyond its rated capacity. 

 

•  Use only on a hard, level, clean and dry surface capable of supporting the load. 

 

•  This adapter was designed for use with transmissions only. Read the appropriate vehicle service manual for instructions and  

 

 

  procedures on transmission removal and installation. 

 

•  Use this adapter only with adapters and load restraints provided. Use of this adapter is limited to the removal, installation, and    

 

  transportation (in the lowered position) of transmissions. 

 

•  Wear eye protection that meets ANSI Z87.1 and OSHA standards. 

 

•  Do not lift or support the vehicle with the jack used with this adapter.

 

•  Secure the load to the adapter. 

 

•  Make sure the transmission is centered and balanced on the adapter. 

 

•  This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 

Wash  

 

  hands thoroughly after handling.

 

 

•  Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, 
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS could 
cause accidents resulting in serious or fatal personal injury and/or property damage.

WARNING: Indicates a hazardous situation 
which, if not avoided, could result in death 
or serious injury.

OPERATING MANUAL & PARTS LIST FOR 791-7130

WARNING

WARNING

WARNING

WARNING

Summary of Contents for 791-7130











Reviews: