To Clean the dispensing head follow the following steps:
a.
Remove the pick up tube and discard.
b.
Remove the cap from the head body by turning the cap counter-
clockwise. The cap will pop off.
c.
Both the cap and the head body may be placed in a dishwasher and cleaned
using a normal wash cycle. Avoid high heat dishwashers, and sanitizers when
washing Clean Pour Dispensing Heads.
d.
After washing, the cap can be reattached to the head body. A small amount
of lubricant spray should be applied to the gasket under the cap to ensure
proper rotation. Only the food-grade silicon provided by Napa Technology is
recommended.
e.
A fresh pick up tube can now be attached to the bottom of the head body.
NOTE:
Do not attempt to remove steel spout, as you may damage the
Clean Pour Head.
Cleaning
and
Care
Napa Technology Customer Support 800.603.6550
Page 24
