8
Inform the medical staff that the liquid is
a 25-35% solution of potassium
hydroxide.
4. Never attempt to open the battery
pack for any reason. If the plastic
housing of the battery pack breaks open
or cracks, immediately discontinue its
use and do not recharge it.
5. Do not store or carry a spare battery
pack in a pocket or toolbox or any other
place where it may come into contact
with metal objects. The battery pack may
be short- circuited causing damage to
the battery pack, burns or a fire.
Battery chargIng InforMatIon
Charging rates for NiCad and/or Li-Ion
NiCad and/or Li-Ion battery charging
rates are determined by the time taken to
fully charge the battery and are
determined by the charge current. The
three most commonly used charging
rates are typically:
Fast charge.
Slow charge.
Trickle charge.
faSt charge BatterIeS
The charging rates for fast charge
batteries can vary between 30 minutes
and 90 minutes. The charging rate for the
battery supplied with a cordless power
tool is stated in the product manual.
SloW charge Battery
The charging rates for slow charge
batteries are between 3 hours and 5
hours.
trIcKle charge BatterIeS
The charging rates for trickle charge
batteries are between 7 hours and 9
hours.
IMPortant!
nIcad and/or lI-Ion Battery
chargIng InforMatIon.
alWayS fully dIScharge a nicad
and/or li-Ion Battery Before
chargIng and neVer eXceed the
chargIng rate tIMe, eXcePt When
“condItIonIng” a neW Battery.
chargIng Procedure
When charging a new NiCad and/or
Li-Ion battery it should be fully
discharged followed by a full charge for
the charging rate for the battery as
stated in the product manual plus 30
minutes.
This should then be followed by a full
discharge and a further full charge for
the charging rate for the battery as
stated in the product manual plus 30
minutes.
This procedure will condition the battery
and equalise the cell voltages. Following
this procedure will ensure the optimum
operation of the battery.
When repeatedly using the charger to
charge a number of batteries always
allow the charger to cool down before
charging another battery. It is
recommended that the cooling down
period is not less than 30 to 45 minutes.
Summary of Contents for 502129309
