INSTALLATION
Page 10 of 15
NOTE: Please install the embers or log set which you bought or selected with this fireplace. Do not install
after market logs or crystals. Ensure the unit is cool prior to servicing or removal of glass front panel.
-Glass front-part 2 must be removed and the appliance must be mounted in its final location before the
log set / crystal / pebble embers are installed.
LOG SET -part 5
- remove the log set packing materials from the firebox. Fire logs can be placed in the
bottom of firebox if not already preinstalled. Figure A
CRYSTALS-part 6
-carefully open the crystal pouch.
-crystals may have a fine oil residue that needs to be cleaned prior to installation. CLEAN THE CRYSTALS
with mild dish soap / water bath. Drain, rinse thoroughly and dry before placing into the tray of firebox.
-Place the plastic tray into the firebox. Figure B
-Carefully place crystals into the bottom tray on the front of the appliance. Apply an even layer of crystals
from side to side. Figure C
LOG SET / CRYSTAL EMBER INSTALLATION
A
B
C
5
6
