a)
To remove the secondary hard drive cage,
please remove the four screws, as shown
on the image and remove the cage together
with the holder.
c)
Please place the fan on the inside of the case and secure it from the outside.
d)
Attach the dust filter mounts again to the case bottom and slide the dust filter back to its
original position.
The dust filter at the bottom can be pulled
out for easy cleaning.
Additional case fans in the side panel and on the bottom of the Deep Silence 5 should be
mounted so that cooler air is introduced into the case (fan rear side facing inwards).
7. The 2-channel fan controller
The Deep Silence 5 is equipped with a 2-channel fan control for up to six case fans. You can
operate up to three fans per channel.
7.1 Connecting the fans to the fan control
The fan controller is powered by a 4-pin Molex connector that is connected directly to the
power supply.
The controller has two channels (A and B), with each channel able to control up to three 3-pin
fans, therefore a total of six fans can be controlled.
14
Summary of Contents for Deep Silence 5
Page 1: ......
