22
3cm
5-10cm
1
2
5
3
4
DISCONNECTING THE UROSHIELD®
1
Switch OFF the UroShield
®
to prevent the
driver from sounding an alert when it is
disconnected from the actuator.
2
Hold the driver in one hand and the
actuator cable plug in the other hand,
then pull them apart.
(fig.5)
SHOWERING AND BATHING
The UroShield
®
driver is not waterproof
and should not be exposed to water. If the
patient wants to shower or bath,
do the following:
1
Before entering the bathroom, switch
OFF the UroShield
®
driver.
2
Disconnect the UroShield
®
driver from the
actuator.
3
Place the driver in a clean, dry area to
insure the driver is not at risk to come in
contact with water.
The actuator can remain attached to the
catheter while the patient is showering or
bathing. Prior to reconnecting the actuator
back to the driver, wipe off any water from
the connector on the actuator cable. After
reconnecting the driver, turn on the driver
to make sure the display shows the actuator
being properly connected the actuator is
functioning normally.
fig.5
7
Operation
7.6
7.7
