UroShield® User Manual
20-100-0022 Ver. 02
18
The driver display will show the following screens in quick succession:
The UroShield® is now working and charging at the same time (you do not
need to wait for the battery to charge fully, which takes about 2 hours).
6.2
Switching the UroShield
®
ON or OFF
To switch the UroShield® ON, when the driver is turned off and not connected
to the mains, press the ON/OFF button for 2–3 seconds.
About 30 seconds following above display sequence, the driver display shows
the battery level and actuator connection as shown in the following screen:
If another screen appears instead of the above, see section 6.5.2 Alerts and
Troubleshooting.
After another 3 minutes, the display shows the screensaver:
Note: when the screensaver is shown, you can return to the battery/actuator
status by pressing the ON/OFF button briefly (that is, for less than 2 seconds).
UroShield
