1
1
Brief introduction about NSR100W
NSR100W Wide Area Perimeter Intrusion Detection Radar, which is a k-band radar sensor
developed by Hunan Nanoradar Science and Technology Co., Ltd., aims at the application of
outdoor active perimeter intrusion alarm security. And it is one of the NSR series of high-end
products.
NSR100W utilizes single pulse technology and low-power FMCW modulation technology,
with high-precision angular resolution, very low-speed measurement capabilities and precise
ranging capability. It can realize the volumetric protection and alarm report in an area with the
length of 100 meters and it can follow the same time 32 targets, and can avoid the interference
of small animals like cats and dogs by signal processing and pattern recognition. Therefore it
has been highly intelligent perimeter alarm security equipment.
Measurement
：
194x158x49(mm)
Weight
：
1000g
Figure 1 NSR100W Outlook & Measurements
2
Matters of attention in use
Much attention should be paid to the " matters of attention ".
(1) NSR100W needs to be installed in a stable bracket;
(2) When installing NSR100W, the direction of connection cable lines should be toward down,
vertical to the ground;
(3) There should be no existing obstacle with regular movement within the detection range.
Any problem in installation, please feel free to contact Nanoradar.
