nanoradar NRA15, User Manual

Page: 6 / 16

2
Figure 3 NRA15 sensor
5 sensor
4 Quick-to-use steps
4.1 Connection cable installation
The definition for NRA15 sensor interface pins are as shown in table 1.
Table 1 The definition for NRA15 pin interface
Pin No.
definition
value color
1 POWER IN 4~6 V DC red
2 GND - black
3 TTL USART_RX 0~3.3V DC white
4 TTL USART_TX 0~3.3V DC yellow
4.2 Test and use
NRA15 sensor data can be acquired and parsed by the "MMW Radar general Management
Tool" testing software, which is used to visually display the observation results. The tool is
helpful in the use of NRA15 sensor.
The UART serial port test method is as follows:
First of all, the "millimeter-wave radar general management tool" (PC test software), user
manual shall be provided by Nanoradar. According to the user manual, install and configure the
PC test software.
1) Test tools and software are as the following table
：