Document # 700005-0000R
April 3, 2019
9
WIRELESS
ULTRA SYSTEM
OWNER’s Manual
5. Cable (B) part # 210029-0121R “BLUE-RED-BLACK”
Attach the
blue wire (FORCE CASHOUT)
to the gaming terminal’s “knock-off”
button using the enclosed red wiretaps
Attach the
red wire (+12Vdc - SUPPLY VOLTAGE)
to the +12 VDC
of the
gaming terminal’s power supply using the enclosed red wiretaps.
Attach the
black wire (GND)
to the ground connection of the gaming terminal’s
power supply using the enclosed red wiretaps.
6. Install Spill Proof printer (E) at the bar or counter (for further info consult Spill Proof
Printer Owner’s Manual)
7. Connect the Host Game Interface (F) to the Spill proof printer (E) using cable (D)
8. Connect the Control box (G) to the Host Game Interface’s (F) left RJ12 receptacle
9. Power ON the Spill Proof printer (C) with paper loaded
10. Turn ON all gaming terminals, if the installation was completed correctly, within 60
seconds the control box (G) lights corresponding to the connected games will be
illuminated.
Note: Additional cables (not shown) are used for advanced programming and firmware
updates
