Before using your Smart Warming Bowl, please ensure that
you read these instructions carefully. Please save these
instructions for future reference. This product is designed
for use with nanobébé bottles and breastmilk storage bags.
WARNING!
Failure to follow instructions may cause scalding
•Always place the bottle or bag in the warming bowl before
filling the bowl with water.
•To preserve nutrients, never fill the bowl with boiling water.
•Never heat the bowl in a microwave, in an oven or on a stovetop.
•Before filling the bowl with water, ensure that it is placed on
a flat surface such as a kitchen counter.
•Always check the temperature of milk before giving your baby
a bottle, by letting a few drops fall on your skin.
•The amount of time it takes cold milk to reach body
temperature varies with the quantity of milk and the
temperature of the water in the bowl.
USING THE BOWL TO DEFROST BREASTMILK BAGS
1. Ensure the storage bag you are about to defrost is tightly
sealed by running your finger along the double zipper.
2. Place the storage bag inside the warmer with the
zipper facing up.
3. Fill the warmer with lukewarm tap water.
4. Remove the bag from the warmer when the frozen
breastmilk has completely thawed. (The time it takes
depends on the temperature of both the milk and
the water).
5. If feeding immediately, transfer the milk to a
nanobébé bottle and warm the bottle to body
temperature. Thawed breastmilk can be stored in the
fridge for up to 24 hours. Do not refreeze.
HOW TO USE YOUR SMART WARMING BOWL
Note: Carefully remove the bottle from the warmer and check
the temperature of the milk by letting a few drops fall on your
skin, the inside of your wrist for example. The milk should be
approximately at body temperature. If the milk has not reached
body temperature, return to step 1 and repeat the process.
Never use boiling water. Warm bottle in tap water with nipple/
teat ONLY. Never use travel & storage cap while warming.
Bottle will naturally float upwards as the breastmilk begins to be
surrounded by water and the warming process begins.
Place the bottle, with the
nipple/teat on, upon the
dome at the base of the
bowl to prevent any air
pockets.
Fill the bowl with
warm tap water.
Remove from water, check temperature, if further warming
is needed return to step 1 and repeat the process, then enjoy
feeding your baby!
1
2
3
NEVER use boiling water
Warm bottle in warm tap water with nipple/teat
ONLY
NEVER use travel & storage cap while warming
Water level should not reach the nipple/teat ring
WARNING!
