NANO X2 Rechargeable, Instruction Manual

Page: 14 / 24

Step 2 : Charging the device
Place your hearing aids in the charger with the ear buds resting inside
the case (Make sure the light is on to make sure the charging case is
working).
FLASH BLUE light= Device is charging
THREE BLUE light s= Device fully
charged
It normally takes 3 hours or so to fully
charge the charger case.
IMPORTANT:
While charging the device, making sure the
lid closed or the power will run out.
21
It normally takes around
seven( 7 ) hours to fully
charged the device. T he
fully charged case can
charge two devices for
2~3 times.
Hearing aid stand by
ti me: 20h.
TIPS:
- Charging occurs with the lid opened or closed . But you ’ d better to
close the lid to avoid the power loss.
- If you will not be wearing your hearing aids for an extended period of
time (Le.weeks), make sure you remove the plug from the charger and
the hearing aids from the charging ports before storing them inside the
charger case.
After a
full charge, the LED will flash for 15
seconds
then automatic out.
22