NANO NBP Series, Operation Manual

Page: 12 / 24

nano
pg. 12
Pre-requisites for Installation:
To ensure a safe and smooth installation, we recommend you go through the
steps indicated below:
• Make sure that all personnel involved have read this operation
manual thoroughly. If you have any questions, feel free to
contact your nano representative or the factory and we will be
glad to assist you. If you need help with the installation and
commissioning, we will be glad to schedule a factory serviceman to
visit your site and perform the entire process of installation for a
nominal fee.
• Have extra copies of the operation manual – you can print it directly
from this program.
• Special care must be taken while transporting the unit to the
installation site.
• Dryer must not be moved or lifted by the attached piping
Location:
• Careful consideration should be given to the location of the dryer in
order to assure optimum results. Ensure that the load bearing weight
of the floor is adequate for the weight of the dryer.
• The dryer should be located in an open area and a level ground. Dryer
can be bolted to the floor to eliminate vibrations.
• The ambient temperature should be between 40 Deg.F and 100 Deg.F.
Low temperature could affect the dryer process and result in high
outlet dew point.
• In conditions where the ambient drops below freezing, nano
recommends the use of heat trace for the equipment. For a nominal
price, this feature will ensure that you have trouble free operation
during the winter months (the dewpoint of the outlet air will be
consistent)
• Dryer and accompanying filters should be installed with at least 2~5
feet clearance from the adjoining walls to provide easy access for
routine maintenance.