Fit 2x 13mm O rings into the
grooves in the bottom of
the burner body.
If the top end of the wick is
frayed you will need to burn off
the loose fibres, allow to cool,
and then roll the end into a
blunt point.
ONLY EVER PERFORM THIS STEP
ON DRY WICK, NEVER ON WICK
THAT HAS BEEN SOAKED IN FUEL.
Insert the prepared end of the
wick into the burner cap, a
pushing and twisting motion
works best.
There must be 3-4mm of wick
protruding from the top of the
burner cap for efficient running.
Repeat for the 2nd
wick and burner cap.
Nano Flux Twin Assembly instructions page 21 of 27
Copyright Kontax Engineering Ltd 2019
