Page 14
6.2 SERVICE ‘B’ INSTRUCTIONS
REPLACING INLET CONTROL AND EXHAUST VALVES (NDL-100 TO NDL-130)
(Every 24,000 hrs or 4 Years)
Figure 1.
VALVE
GASKET
INLET
CONTROL
VALVE
SCREWS
1. Remove the 6x fixing screws and 6x washers to release the inlet control valves from the valve block.
(See Figure 1)
2. Discard the valve gaskets and inlet control valves and replace from the service pack.
3. Replace the 6x fixing screws and 6x washers.
4. Replace the solenoid plug and screw (See Figure 1 on page 12)
When service B is complete reset the dryer, refer to page 18.
Summary of Contents for D-Series
Page 25: ...Page 25 NOTES...
